| 66151L Franke Slewing Ring Bearings | da (min):164 mm; Enclosure:Open; Static Load Rating:168,000 N; Radial Clearance:0.046 to 0.091 mm; D:270 mm; Fillet Radius/Chamfer:3 mm; d:150 mm; Limiting Speed - Oil:2,700 rpm; Da (max):256 mm; ra (max):2.5 mm; B:45 mm; Configuration:Single Row; Weight:9.410 kg; Limiting Speed - Grease:2,300 rpm; |
| 66149L Franke Slewing Ring Bearings | Enclosure:Open; ra (max):3 mm; Bore Type:Cylindrical Bore; Limiting Speed - Grease:1,800 rpm; B:102 mm; Dynamic Load Rating:920,000 N; dd (min):198 mm; d:140 mm; D:300 mm; Radial Clearance:0.060 to 0.105 mm; db (min):158 mm; Weight:36.800 kg; Limiting Speed - Oil:2,200 rpm; ra1 (max):3 mm; dc (min): |
| 66144L Franke Slewing Ring Bearings | Note:This product line wa; Dimension R:1.4 in; Dimension A:7.5 in; Dimension D:11.0 in; Dimension S:2.0 in; Maximum Speed:2790 rpm; Dimension T:14.5 in; Seal Type:High Temperature Pac; Dimension N:12.5 in; Tensioning Unit Type:Tension Type; Cr - Dynamic Load Rating:42039 lbf; Series Type:Light Serie |
| 66160L Franke Slewing Ring Bearings | Design Units:Imperial; G1 - Heat Generation Factor (Roller-Raceway):28.3; C0 - Static Radial Rating:17000 lbf; K - Factor8:1.45; d:1.8105 in; Aa - Cage-Cone Backface Clearance:0.02 in; Cg - Geometry Factor:0.0789; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:6840 lbf; da - Cone |
| 66157L Franke Slewing Ring Bearings | Dynamic Load Rating C11:1930 kN; Chamfer r1smin3:4.0 mm; Backing Shaft Diameter ds:251.0 mm; Lubrication Groove g:12.3 mm; Thermal Speed Ratings - Grease:940 rpm; Chamfer rsmin:4.00 mm; Dimension S4:5.60 mm; Geometry Factor Cg2:0.1800; Bore d:220 mm; Lubrication Hole Diameter h:6.0 mm; Static Load R |
| 66152L Franke Slewing Ring Bearings | Axial Load Factor Y2:3.43; B:88 mm; Groove Width A:16 mm; Da (max):268 mm; Hole Diameter (do):8 mm; D:280 mm; Retainer Material:Pressed Steel; Fillet Radius/Chamfer:2.1 mm; Dynamic Load Rating:1,260,000 N; Axial Load Factor Y1:2.30; Enclosure:Open; Center Guidance:Floating Steel Ring; Constant e:0.2 |
| 66142L Franke Slewing Ring Bearings | G:1.355 in; U:16.548 in; C:19.318 in; L1:0.375 in; E:18.188 in; Major Diameter d:16.532 in; S1:0.875 in; H:0.604 in; T1:1/2-13; Threads No. per Inch:5; Y:18.110 in; D:2.073 in; |
| 73101L Franke Slewing Ring Bearings | da (min):26 mm; Cy (max):3.3 mm; D:47 mm; Snap Ring Width:1.1 mm; Dynamic Load Rating:12,800 N; r1:0.5 mm; Fillet Radius/Chamfer:1 mm; D1 (max):44.6 mm; Da (max):41 mm; Dx (min):53.5 mm; Factor fo:13.1; Enclosure:Single Shield with S; Limiting Speed - Grease:16,000 rpm; Static Load Rating:6,600 N; C |
| 66141L Franke Slewing Ring Bearings | C:75 mm; Weight:153 Kg; Locknut:HM3196; L1:397.00 mm; Appropriate Hydraulic Nut:HMV96; C1:95.00 mm; Ro:M8; t:12 mm; e:6.5 mm; G:Tr480x5; d1:450.00 mm; D3:620 mm; Lockwasher and Lockplates:MS3196; |
| 66148L Franke Slewing Ring Bearings | B - Double Cone Width:2.0620 in; Db - Cup Backface Backing Diameter:3.03 in; R - Cone Frontface To Clear Radius1:0.060 in; T - Bearing Width across Cups:1.9788 in; Cone Part Number:358D; Y1 - ISO Factor9:2.2; e - ISO Factor8:0.31; Y2 - ISO Factor10:3.28; Cage Type:Stamped Steel; C - Cup Width:0.6875 |
| 66145L Franke Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:2.8 mm; Cone Part Number:EE217060; Cup Part Number:217112; C90 - Dynamic Radial Rating (90 million revolutions)4:41700 lbf; da - Cone Frontface Backing Diameter:170.94 mm; Cg - Geometry Factor:0.114; G2 - Heat Generation Factor (Rib-Roller End):71.8; C1 - Dynamic R |
| 66143L Franke Slewing Ring Bearings | ra (max):1 mm; D1 (max):81.8 mm; Da (max):78 mm; Limiting Speed - Oil:9,300 rpm; Dynamic Load Rating:32,500 N; Configuration:Single Row; da (min):52 mm; a (max):3.3 mm; Enclosure:Snap Ring Groove wit; Radial Clearance:0.018 to 0.036 mm; Snap Ring Width:1.7 mm; Weight:0.407 kg; d:45 mm; D:85 mm; r1:0 |